Performing Pattern No. Selection; Selection From The Data Input Screen - JUKI LBH-1790 Instruction Manual

6. PERFORMING PATTERN NO. SELECTION

6-1 Selection from the data input screen

1 Display the data input screen.
Only in case of the data input screen (blue), the
contents of setting can be changed. In case of the
sewing screen (green), press READY key
and display the data input screen.
2 Call the PATTERN NO. SELECTION screen.
Press PATTERN NO. SELECTION button
and the pattern No. selection screen is displayed.
Pattern No. which is selected at present and the
contents are displayed in the upper part of the
screen and the list of the pattern No. buttons
which have been registered is displayed in the
lower part.
3 Select the pattern No.
When UP or DOWN SCROLL button
(B) is pressed, the pattern No. buttons (C) which
have been registered are changed over in order.
The contents of the sewing data inputted in the
pattern No. are displayed in the button. Here,
press the pattern No. button (C) you desire to
select.
4 Determine the pattern No.
Press ENTER button
No. selection screen is closed. Then the selection
has been finished.
※ When you desire to delete the registered pattern,
press DELETE button
However, the pattern which is registered to
continuous stitching and cycle stitching cannot be
deleted.
(A)
(D), and the pattern
(E).
– 0 –
A
C
D
B
E