Iview 2 Management Software - IMC Networks iMcV-FiberLinX-II Operation Manual

2
iView Management Software
iView² is the IMC Networks management software designed specifically for the IMC
Networks iMcV family of modules. It features a Graphical User Interface (GUI) and
gives network managers the ability to monitor and control the manageable IMC
Networks products.
2
iView is available in several versions and can also function as a snap-in module for
HP OpenView Network Node Manager. For assistance in selecting the right version
of iView² for a specific operating system, please visit:
http://www.imcnetworks.com/products/iview2.cfm
2
iView supports the following platforms:
• Windows 98
• Windows NT
• Windows 2000
• Windows XP
• Windows Vista
In addition, there are Java versions of iView² for other Java capable operating systems
such as Linux.
iConfig Utility
iConfig is a configuration utility in iView² that allows the user to quickly and easily
complete the initial SNMP configuration for IMC Networks' SNMP-manageable
devices. iConfig can set the IP address, set the Subnet Mask and Default Gateway,
define the Community Strings, and define SNMP Traps. iConfig can also be used to
upload new versions of unit software.
iConfig offers an authorized IP address system and access restriction to MIB groups
supported by the IMC Networks manageable devices. These extra layers of security
are purely optional and do not effect SNMP compatibility in any way.
Default Username/Password
The default user ID and password for both iConfig and Telnet are the following:
User: admin / Password: admin
For information on how to set/change passwords, see Password Protection/Changing
Password.
It is the responsibility of the network administrator to store and maintain the
password lists.
NOTE
4