Removing And Replacing The Lan Core I/O Card; Removing The Lan Core I/O Card; Inserting Scsi I/O Card - HP Integrity rx4640 Service Manual

6. Install the replacement SCSI I/O card.
I/O card.
CAUTION:
can result in damage to the card.
Ensure that you fully seat the card into the slot or the card can be damaged when power is
reapplied to the slot.
Figure 4-32 Inserting SCSI I/O Card
7. Close the blue PCI card latch for slot 1 by twisting it counterclockwise.
8. Reconnect the internal and external SCSI cable(s) to the SCSI core I/O card.
9. Replace the top cover. See
10. Push the server back into the rack until it stops.

Removing and Replacing the LAN Core I/O Card

Removing the LAN Core I/O Card

To remove the LAN core I/O card in slot 2, follow these steps:
1. If rack mounted, slide the server out from the rack until it stops. See
From the Rack" (page
2. Remove the top cover from the chassis. See
3. Disconnect any LAN cables connected to the LAN core I/O card.
74 Removing and Replacing Components
Always handle I/O cards by their edges. Failure to comply with this precaution
"Replacing the Top Cover" (page
31).
Figure 4-32 shows the correct way to install the SCSI
"Inserting the Server into the Rack" (page
"Removing the Top Cover" (page
36).
"Extending the Server
36).
32).