Replacing The I/O Baseboard; Removing The I/O Baseboard - HP Integrity rx4640 Service Manual

7. Grasp the handle on the rear of the server and slide the I/O baseboard assembly all the way
to the rear until it is removed from the chassis.
baseboard.
NOTE:
Figure 4-23 Removing the I/O Baseboard

Replacing the I/O Baseboard

To replace the I/O baseboard, follow these steps:
58 Removing and Replacing Components
The I/O baseboard assembly is large, so be careful when lifting it out of the server.
Figure 4-23 shows how to remove the I/O