Booting Hp-Ux (Efi Shell) - HP Integrity rx4640 Service Manual

4. Exit the console and iLO MP interfaces when finished using them.
To exit the system console and return to the iLO MP Main Menu, press Ctrl+B. To exit the
iLO MP, enter X at the Main Menu.

Booting HP-UX (EFI Shell)

From the EFI Shell environment, boot HP-UX on a device by first accessing the EFI System
Partition (for example fs0:) for the root device, then entering HPUX to initiate the loader.
1. Access the EFI Shell environment for the server on which you want to boot HP-UX.
To choose the system console, log in to the iLO MP and enter CO.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main
EFI menu). If you are at another EFI menu, choose Exit from the submenus until you return
to the screen with the EFI Boot Manager heading.
To access the EFI Shell environment, choose EFI Shell from the EFI Boot Manager menu.
2. To list all currently mapped bootable devices, issue the map command at the EFI Shell
environment.
The bootable file systems of interest typically are listed as fs0:, fs1:, and so on.
3. Access the EFI System Partition (fsX: where X is the file system number) for the device
from which you want to boot HP-UX.
For example, enter fs2: to access the EFI System Partition for the bootable file system
number 2. The EFI Shell prompt changes to reflect the file system currently accessed.
The file system number might change each time it is mapped (for example, when the system
boots, or when the map -r command is issued).
4. When accessing the EFI System Partition for the desired boot device, issue the HPUX command
to initiate the HPUX.EFI loader on the device you are accessing.
The full path for the loader is \EFI\HPUX\HPUX.EFI. When initiated, the loader references
the \EFI\HPUX\AUTO file and proceeds to boot HP-UX using the default boot behavior
specified in the AUTO file.
You have 10 seconds to interrupt the automatic booting of the default boot behavior. Pressing
any key during this 10-second period stops the HP-UX boot process and enables you to
interact with the HPUX.EFI loader. To exit the loader (the HPUX> prompt) enter exit (this
returns you to the EFI Shell).
To boot the HP-UX operating system, do not enter anything during the 10-second period
given for stopping at the HPUX.EFI loader.
Shell> map
Device mapping table
fs0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000)
blk0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)
blk1 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000)
blk2 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part2,Sig72550000)
blk3 : Acpi(000222F0,2A8)/Pci(0|0)/Scsi(Pun8,Lun0)
blk4 : Acpi(000222F0,2A8)/Pci(0|1)/Scsi(Pun2,Lun0)
Shell> fs0:
fs0:\> hpux
(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved
HP-UX Boot Loader for IA64
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot -
120 Booting the Operating System
Revision 1.723
9