Locator Led And Button; Pci-X Leds And Hardware Errors; Ilo Mp Lan Leds; Ilo Mp Led Status Description - HP Integrity rx4640 Service Manual

Figure 5-7 iLO MP LAN LEDs
Table 5-7 iLO MP LED Status Description
LED
100M amber
100M amber
10M green
10M green
On other servers, the LEDs display as follows:
Figure 5-8 iLO MP LAN LEDs
Table 5-8 iLO MP LED Status Description
LED
100M green
100M green
10M amber
10M amber

Locator LED and Button

An LED and button is provided on the rear panel of the server. Another single blue LED and
button is on the front control panel that enables/disables the locator function. For the locator
LED and button location, see

PCI-X LEDs and Hardware Errors

The following table describes the hot-pluggable PCI-X LED error conditions.
Condition
On
Blinking
On
Blinking
Condition
On
Blinking
On
Blinking
Figure 5-7.
Status
Linked at 100MBps. No activity
Linked at 100MBps. Activity present
Linked at 10MBps. No activity
Linked at 10MBps. Activity present
Status
Linked at 100MBps. No activity
Linked at 100MBps. Activity present
Linked at 10MBps. No activity
Linked at 10MBps. Activity present
Troubleshooting Using LED Indicators 105