User Login Using Directory Services - HP Integrated Lights-Out User Manual

Remote Console—This option allows the user access to the Remote Console.
Virtual Media—This option allows the user access to the RILOE II Virtual Floppy and Virtual Media
functionality.
Server Reset and Power—This option allows the user to remotely reset the server or power it down.
Administer Local User Accounts—This option allows the user to administer accounts. The user can
modify their account settings, modify other user account settings, add users, and delete users.
Administer Local Device Settings—This option allows the user to configure the RILOE II board settings.
These settings include the options available on the Global Settings, Network Settings, SNMP Settings,
and Directory Settings screens of the RILOE II Web browser.

User login using directory services

The iLO login page Login Name field accepts all of the following:
Directory users
LDAP Fully Distinguished Names
Example: CN=John Smith,CN=Users,DC=HP,DC=COM, or @HP.com
NOTE:
are trying to access. You must provide the domain name or use the LDAP distinguished name
of your account.
DOMAIN\user name form (Active Directory Only)
Example: HP\jsmith
username@domain form (Active Directory Only)
Example: jsmith@hp.com
NOTE:
searchable contexts, which are configured within Directory Settings.
User name form
Example: John Smith
NOTE:
searchable contexts, which are configured within Directory Settings.
Local users—Login-ID
NOTE:
local users. For Directory Services users, the maximum length of the login name is 256
characters.
The short form of the login name by itself does not tell the directory which domain you
Directory users specified using the @ searchable form may be located in one of three
Directory users specified using the user name form may be located in one of three
On the iLO login page, the maximum length of the login name is 39 characters for
Directory services 133