Installing Ilo Device Drivers; Microsoft Windows Nt, Windows 2000, And Windows Server 2003 Driver Support - HP Integrated Lights-Out User Manual

Select Network>NIC>TCP/IP, press the Enter key, and enter the appropriate information in the IP
4.
Address, Subnet Mask, and Gateway IP Address fields.
Save the changes.
5.
Exit iLO RBSU. The changes take effect when you exit iLO RBSU.
6.

Installing iLO device drivers

The SmartStart Firmware Maintenance CD contains all of the necessary support for your server, or you
can download all the necessary iLO support drivers from the HP website
(http://www.hp.com/servers/lights-out).
To download the drivers:
Click the iLO graphic.
1.
Select Software and Drivers.
2.
The iLO Management Interface Driver allows system software like SNMP Insight Agents and the Terminal
Services Pass-Through service to communicate with iLO.
Microsoft Windows NT, Windows 2000, and Windows Server
2003 Driver Support
The device drivers that support the iLO are part of the PSP that is located on the HP website
(http://www.hp.com/support) or on the SmartStart CD. Before you install the Windows® drivers, obtain
the Windows® documentation and the latest Windows® Service Pack.
iLO pre-requisite files for Microsoft®
The CPQCIDRV.SYS file provides the iLO Management Interface Driver support.
The CPQASM2.SYS, SYSMGMT.SYS, SYSDOWN.SYS files provide the iLO Advanced Server
Management Controller Driver support.
Installing or updating the iLO drivers for Microsoft®
The PSP for Microsoft® Windows® products includes an installer that analyzes system requirements and
installs all drivers.
The PSP is available on the HP website (http://www.hp.com/support) or on the SmartStart CD.
NOTE:
the iLO firmware. The latest version can be obtained as a Smart Component from the HP
website (http://www.hp.com/servers/lights-out).
To install the drivers in the PSP, download the PSP from the HP website (http://www.hp.com/support),
run the SETUP.EXE file included in the download, and follow the installation instructions. For additional
information about the PSP installation, read the text file included in the PSP download.
If you are updating the iLO drivers, be sure that the iLO is running the latest version of
Configuring iLO 18