HP Integrated Lights-Out User Manual page 37

Windows® RDP Pass-Through service
To use the iLO Terminal Services Pass-Through feature, a service must be installed on the host system. This
service will show the name of iLO Proxy in the host's list of available services. The service utilizes the
Microsoft® .NET framework's security and reliability. After the service has started, the service polls the
iLO to find out if a an RDP connection with the client has been established. If an RDP connection with the
client has been established, it then establishes a TCP connection with localhost and begins exchanging
packets. The port used to communicate with localhost is read from the Windows® registry at
HKLM\SYSTEM\CurrentControlSet\Control\TerminalServer\Wds\rdpwd\Tds\tcp\P
ortNumber
This is typically port 3389.
Terminal Services Pass-Through installation
Microsoft® Windows® 2000 and Windows® 2003
Microsoft® Windows® 2000 servers require Microsoft® .NET Framework to support the use of
Terminal Services. The Terminal Services pass-through service and the iLO Management Interface
Driver for Windows® 2000 and Windows® Server 2003 must be installed on the server that has
the iLO. The service and iLO driver are available as Smart Components on the HP website and on
the HP SmartStart CD. They are also part of the ProLiant Support Pack for Microsoft® Windows®
Server 2003 and Microsoft® Windows®.
Install the iLO Management Interface driver.
a.
Install the service. To install the service, launch the component installer and follow the directions
b.
in the installation wizard.
If the service is already installed, then it must be manually restarted or the server rebooted when
the driver is installed.
Install or activate the Terminal Services client.
c.
Microsoft® Windows® 2000 servers require the installation of Microsoft® .NET Framework to
support the use of Terminal Services. After .NET Framework is installed, the Terminal Services
client must be installed from diskettes created by the Terminal Services server or by downloading
the client from the Microsoft® website and installed through the Control Panel using Add or
Remove Programs. Consult your Windows® operating guides or help files for instructions. When
installing the Terminal Services client on Windows® 2000, use the default installation location.
On Windows® Server 2003, you can activate Remote Desktop sharing by selecting the Remote
tab under My Computer and Properties.
If the iLO installation is complete and if Terminal Services pass-through is set to automatic, then
Terminal Services launches when the installation is complete.
Microsoft® Windows® XP
On Windows® XP servers, Remote Desktop Connection is built in and has no other installation
requirements.
Errors during installation and during execution of the pass-through service will be logged in the server's
Application Event Log. The pass-through service may be removed using Add or Remove Programs in the
Control Panel.
Configuring iLO 37