Changing The Vcx V7122 Username And Password; Status And Diagnostic; Gateway Statistics - 3Com VCX V7122 User Manual

Voip sip gateway
Hide thumbs Also See for VCX V7122:
Table of Contents

Advertisement

8
To reset the VCX V7122, see

Changing the VCX V7122 Username and Password

To prevent unauthorized access to the VCX V7122, it is recommended that you change the
username and password (both are case-sensitive) that are used to access the Web
Interface.
To change the username and password, follow these steps:
1
Open the 'Change Password' screen (Advanced Configuration menu > Change
Password); the 'Change Password' screen is displayed.
Figure 36
Change Password Screen
2
In the 'User Name' and 'Password' fields, enter the new username and the new
password respectively. Note that the username and password can be a maximum of 7
case-sensitive characters.
3
In the 'Confirm Password' field, reenter the new password.
4
Click the Change Password button; the new username and password are applied and
the 'Enter Network Password' screen appears, shown in
5
Enter the updated username and password in the 'Enter Network Password' screen.

Status and Diagnostic

Use this subdivided menu to view and monitor the gateway's channels, Syslog messages,
hardware / software product information, and to assess the gateway's statistics and IP
connectivity information.

Gateway Statistics

Use the screens under Gateway Statistics to monitor real-time activity such as IP
Connectivity information, call details and call statistics, including the number of call attempts,
failed calls, fax calls, etc.
Note: The Gateway Statistics screens doesn't refresh automatically. To view updated
information re-access the screen you require.
IP Connectivity
The IP Connectivity screen provides you with an online read-only network diagnostic
connectivity information on all destination IP addresses configured in the Tel to IP Routing
table.
Note: This information is available only if the parameter 'AltRoutingTel2IPEnable' (described
in
Table 28
on page 119) is set to 1 (Enable) or 2 (Status Only).
3Com VCX V7122 SIP VoIP Gateway User Manual
Save Configuration
on page 88.
Figure 16
on page 43.
75

Advertisement

Table of Contents
loading

Table of Contents