Deleting Clients; Editing Client Parameters - 3Com VCX V7122 User Manual

To add a client to the list without using a template, follow these steps:
1 Click on the Add New Client Icon;
a client with blank parameters is displayed.
2 Enter values in the fields on the right side of the window, using the guidelines for the
fields in Setting Client Parameters
3
Click Apply to save this entry to the list of clients, or click Apply & Reset to save this
entry to the list of clients and send a reset message to that gateway to immediately
implement the settings.
Note: To use Apply & Reset you must enable ARP Manipulation in the Preferences
window. Also, you must have administrator privileges for the computer you are using.
An easy way to create several clients that use similar settings is to create a template. For
information on how to create a template see
To add a client to the list using a template, follow these steps:
1
Click on the Add New Client Icon;
a client with blank parameters is displayed.
2 In the field Template, located on the right side of the Client Configuration Window,
click on the down arrow to the right of the entry field and select the template that you
want to use.
3 The values provided by the template are automatically entered into the parameter fields
on the right side of the Client Configuration Window. To use the template parameters,
leave the check box next to that parameter selected. The parameter values appear in
gray text.
4 To change a parameter to a different value, unselect the check box to the right of that
parameter. This clears the parameter provided by the template and enables you to edit
the entry. Clicking the check box again restores the template settings.
5 Click Apply to save this entry to the list of clients or click Apply & Reset to save this
entry to the list of clients and send a reset message to that gateway to immediately
implement the settings.
Note: To use Apply & Reset you must enable ARP Manipulation in the Preferences
window. Also, you must have administrator privileges for the computer you are using.

Deleting Clients

To delete a client from the BootP Tool, follow these steps:
1
Select the client that you wish to delete by clicking on the line in the window for that
client.
2 Click the Delete Current Client button
3
A warning pops up. To delete the client, click Yes.

Editing Client Parameters

To edit the parameters for an existing client, follow these steps:
1
Select the client that you wish to edit by clicking on the line in the window for that client.
2 Parameters for that client display in the parameter fields on the right side of the window.
3
Make the changes required for each parameter.
200
on page 201.
Managing Client Templates
3Com VCX V7122 SIP VoIP Gateway User Manual
on page 203.