3Com VCX V7122 User Manual page 106

ini File Field Name
*
Web Parameter Name
RegistrationTime
[Registration Time]
RegistrationTimeDivider
[Re-registration Timing
(%)]
RegistrationRetryTime
[Registration Retry
Time]
PrackMode
[PRACK Mode]
AssertedIdMode
[Asserted Identity Mode]
EnableRPIheader
[Enable Remote Party
ID]
SIPDestinationPort
[SIP Destination Port]
LocalSIPPort
[SIP Local Port]
IsUserPhone
[Use "user=phone" in
SIP URL]
IsUserPhoneInFrom
[Use "user=phone" in
From header]
106
Valid Range and Description
Registration expired timeout (seconds). The value is used in "Expires = "
header. Typically a value of 3600 is assigned, for one hour registration.
The gateway resumes registration when half the defined timeout period
expires.
Defines the re-registration timing (in percentage). The timing is a percentage of
the re-register timing set by the Registration server.
The valid range is 50 to 100. The default value is 50.
For example: If 'RegistrationTimeDivider = 70' (%) and Registration Expires
time = 3600, the gateway resends its registration request after 3600 x 70% =
2520 sec.
Defines the time period (in seconds) after which a Registration request is
resent if registration fails with 4xx, or there is no response from the
Proxy/Registrar.The default is 30 seconds. The range is 10 to 3600.
PRACK mechanism mode for 1XX reliable responses:
0 = Disabled
1 = Supported (default)
2 = Required
Note 1: The Supported and Required headers contain the "100rel" parameter.
Note 2: The VCX V7122 sends PRACK message if 180/183 response is
received with "100rel" in the Supported or the Required headers.
0 = None (default).
1 = P-asserted.
2 = P-preferred.
The Asserted ID mode defines the header that is used in the generated
INVITE request. The header also depends on the calling Privacy: allowed or
restricted.
The P-asserted (or P-preferred) headers are used to present the originating
party's Caller ID. The Caller ID is composed of a Calling Number and
(optionally) a Calling Name.
P-asserted (or P-preferred) headers are used together with the Privacy
header. If Caller ID is restricted the "Privacy: id" is included. Otherwise, for
allowed Caller ID the "Privacy: none" is used. If Caller ID (received from PSTN)
is restricted, the From header is set to <anonymous@anonymous.invalid>.
0 = Disable (default).
1 = RPI (Remote-Party-ID) headers are generated in SIP INVITE message for
both called and calling numbers.
SIP UDP destination port for sending SIP messages.
The default port is 5060.
Local UDP port used to receive SIP messages.
The default port is 5060.
0 = Doesn't use "user=phone" string in SIP URL.
1 = "user=phone" string is part of the SIP URL (default).
0 = Doesn't use ";user=phone" string in From header (default).
1 = ";user=phone" string is part of the From header.
3Com VCX V7122 SIP VoIP Gateway User Manual