Relocate Diskdumps - HP NonStop TMF Programming Manual

Commands and Responses

RELOCATE DISKDUMPS

The RELOCATE DISKDUMPS command changes the disk media locations for TMF
catalog entries.
Command Syntax
For information on the tokens present in the command and response buffers, see the
SPI Programming Manual.
Command
ZTMF-CMD-Relocate
Object Type
ZTMF-OBJ-DiskDumps
Tokens in Command Buffer
ZTMF-TKN-DumpSerial
ZTMF-TKN-OldDmLoc
ZTMF-TKN-NewDmLoc
Tokens in Response Buffer
ZSPI-TKN-RetCode
ZSPI-TKN-ErrList
...
ZSPI-TKN-EndList
ZTMF-TKN-DumpSerial
ZTMF-TKN-OldDmLoc
ZTMF-TKN-NewDmLoc
Tokens in Command Buffer
ZTMF-TKN-DumpSerial
specifies the serial number of a dump. This token is required; multiple occurrences
are allowed. The special value ZTMF-VAL-WildDumpSerial specifies all dumps
that reside on a specified node. This token is used in place of a valid volume
name; it can not be used with a valid volume name.
ZTMF-TKN-OldDmLoc
specifies the current system and volume name of the catalog entries that are being
altered. The system name is optional; if it is not included, the local system name is
used. This token is required; only one occurrence is allowed; a wild card value is
allowed.
HP NonStop TMF Management Programming Manual—540140-008
token-type ZSPI-DDL-Int2.
token-type ZTMF-TYP-String.
token-type ZTMF-TYP-String.
token-type ZSPI-TYP-Enum.
token-type ZSPI-TYP-List.
token-type ZSPI-TYP-SSCTL.
token-type ZSPI-DDL-Int2.
token-type ZSPI-TYP-String.
token-type ZSPI-TYP-String.
5-145
RELOCATE DISKDUMPS