HP NonStop TMF Programming Manual page 769

Error and Warning Messages
The ZTMF-TKN-VOLUMENAME token supplied within the error list provides
additional information.
399 ZTMF-ERR-DATAVOLWRONGSTATE
The data volume was not acted on by the command due to the current state of
the volume. The command does not operate on volumes which are in that
state.
The ZTMF-TKN-VOLUMENAME token supplied within the error list provides
additional information.
400 ZTMF-ERR-DIRTYREQUIRESALLOWINC
An attempt was made to delete a data volume whose state was disabled-dirty.
However, the ALLOWINCONSISTENCY flag, which is required when a
volume is dirty (possibly inconsistent), was not supplied—or was set to FALSE.
The ZTMF-TKN-VOLUMENAME token supplied within the error list provides
additional information.
420 ZTMF-ERR-DELETEOPERATIONBEGUN
Delete TMF operation begun.
No error list is returned in the response.
421 ZTMF-ERR-TMFISSTOPPED
A STOP TMF command was issued while TMF was stopped.
No error list is returned in the response.
422 ZTMF-ERR-USEABRUPTWHENSTARTING
A STOP TMF command was issued while TMF was starting.
No error list is returned in the response.
423 ZTMF-ERR-TMFALREADYSTOPPING
A STOP TMF command was issued while TMF was stopping.
No error list is returned in the response.
424 ZTMF-ERR-NOTSTOPPEDFORDELTMF
A DELETE TMF command was issued while TMF was starting.
No error list is returned in the response.
HP NonStop TMF Management Programming Manual—540140-008
7-41
Errors