HP NonStop TMF Programming Manual page 176

Commands and Responses
Tokens in Command Buffer
ZTMF-TKN-VolumeName
specifies the data volume whose attribute values are to be displayed. This token
must occur at least once; multiple occurrences are allowed.
ZTMF-TKN-VolumeName can also contain a wild card (value "*", length 1). If the
wild card is specified, it must be the only instance of this token in the command
buffer. The wild card specifies that configuration information is returned for all data
volumes.
ZTMF-MAP-Info-DataVols
is an extensible structured token specifying attributes used to select the volumes
for which information is to be returned. This token is required; only one occurrence
is allowed. If multiple attributes are specified, information is returned only for
volumes that meet all the selection criteria (that is, the values are logically
"and-ed"). This token contains the following fields:
ZAuditTrailId
specifies the audit trail associated with the data volumes whose attributes are
to be returned. This token is optional; multiple occurrences are allowed. If this
field is null, the default is all audit trails. The following values are valid:
ZTMF-VAL-Mat
ZTMF-VAL-Aux01
ZTMF-VAL-Aux02
. . .
ZTMF-VAL-Aux015
ZRecoveryMode
specifies that information should be returned only for data volumes that have
been assigned the selected recovery mode. The following values are valid:
ZTMF-VAL-RecovMode-Online
Audit-trail files are retained on disk.
ZTMF-VAL-RecovMode-Archive
Audit-trail files are released so that they are not retained on disk solely for
the purpose of volume recovery.
If this field is null, the default is any recovery mode.
HP NonStop TMF Management Programming Manual—540140-008
Master audit trail
Auxiliary audit trail #1
Auxiliary audit trail #2
Auxiliary audit trail #15
5-112
INFO DATAVOLS