297: Ztmf-Evt-Downnode - HP NonStop TMF Programming Manual

Event Messages

297: ZTMF-EVT-DownNode

TMF aborted a network transaction to the specified node because there was no reply
from the node within the configured disconnect timer interval.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
ZTMF-TKN-NodeName
ZEMS-TKN-Emphasis
Additional Conditional Tokens
ZTMF-TKN-TransId
ZTMF-TKN-ProcessName
Event-Message Text
The transaction to node ZTMF-TKN-NodeName was aborted because
the node is down, or TMF is not running on the node, or there
was no reply within the disconnect timer duration.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
identifies the TMF process that generated the event. The value of this token for
this event is ZTMF-VAL-PROC-TMP.
ZTMF-TKN-NodeName
is the subject token of the event message, and contains a node name.
ZEMS-TKN-Emphasis
is set to True for this event.
Effect
The transaction is aborted.
Recommended Action
If this is a normal transaction that spans multiple nodes, consider increasing the
disconnect timer interval with a SNOOP SETDISCONNECTTMR command. Do so with
caution, however, because the timer could be merely masking the true cause of the
problem. A Support Note is available documenting the use of this command. Contact
the Global Customer Support Center (GCSC) before issuing the SNOOP
SETDISCONNECTTMR command.
HP NonStop TMF Management Programming Manual—540140-008
token-type ZSPI-TYP-Enum.
token-type ZSPI-TYP-String.
token-type ZSPI-TYP-Boolean.
token-type ZSPI-TYP-TransID.
token-type ZSPI-TYP-String.
6-309
Descriptions of Event Messages