HP NonStop TMF Programming Manual page 446

Management programming manual
Table of Contents

Advertisement

Event Messages
179: ZTMF-EVT-RCOV-ToRba-Too-Low
Either the sno or rba entered with the TOMATPOSITION option of a FILE
RECOVERY command falls below the sno or rba of the online dump.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
ZTMF-TKN-RCOV-Status-Sno
ZTMF-TKN-RCOV-Status-Rba
ZTMF-TKN-RCOV-Status-Rba2
ZEMS-TKN-Emphasis
Event-Message Text
The Audit Trail sequence number or the RBA are too low for
the online dump that is being recovered: atseqno ZTMF-TKN-
RCOV-Status-Sno
or
The Audit Trail sequence number or the RBA are too low for
the online dump that is being recovered: atseqno ZTMF-TKN-
RCOV-Status-Sno
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
identifies the TMF process that generated the event. The value of this token for this
event is ZTMF-VAL-PROC-FILERECOVERY.
ZTMF-TKN-RCOV-Status-Sno
contains an integer specifying an audit-trail file sequence number.
ZTMF-TKN-RCOV-Status-Rba
contains an integer specifying a relative byte address (rba) within the audit-trail file.
If the rba is less than 2,147,483,647, this token contains the actual rba. If the rba is
2,147,483,647 or greater, this token contains 2,147,483,647 (and the RBA2 token
contains the actual rba).
ZTMF-TKN-RCOV-Status-Rba2
contains an integer specifying a relative byte address (rba) within the audit-trail file.
This token always contains the actual rba.
HP NonStop TMF Management Programming Manual—540140-008
token-type ZSPI-TYP-Enum.
token-type ZSPI-TYP-Int2.
token-type ZSPI-TYP-Int2.
token-type ZSPI-TYP-Int4.
token-type ZSPI-TYP-Boolean.
RBA ZTMF-TKN-RCOV-Status-Rba.
RBA ZTMF-TKN-RCOV-Status-Rba2.
6-174
Descriptions of Event Messages

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents