HP NonStop TMF Programming Manual page 787

Management programming manual
Table of Contents

Advertisement

Error and Warning Messages
8050 Tape format is bad (Unexpected tape record type found. Expected
record type: ZART-TKN-EXPECTEDRECORDKIND, actual record
type: ZART-TKN-RECORDKIND).
The actual record type differs from the expected record type. This could be
caused by corruption of the tape, dirty tape drive heads, faulty tape drives, or a
software bug in the dump or restore program.
8051 Tape format is bad (File encountered is not from the same tape set).
The tape format is invalid. This could be caused by corruption of the tape, dirty
tape drive heads, faulty tape drives, or a software bug in the dump or restore
program.
8052 Tape format is bad (File is out of sequence. Expected sequence
number: ZART-TKN-EXPECTEDSEQNUM, actual sequence number:
ZART-TKN-SEQNUM).
The actual file sequence number differs from the expected file sequence
number. This could be caused by corruption of the tape, dirty tape drive heads,
faulty tape drives, or a software bug in the dump or restore program.
8053 Tape format is bad (Variable-length termination record was found in
a fixed-length file).
The file format is invalid. This could be caused by corruption of the tape, dirty
tape drive heads, faulty tape drives, or a software bug in the dump or restore
program.
8054 Tape format is bad (Actual length of the variable-length file did not
match the expected value).
The file format is invalid. This could be caused by corruption of the tape, dirty
tape drive heads, faulty tape drives, or a software bug in the dump or restore
program.
8055 Tape format is bad (Short block in the middle of the file).
The file format is invalid. This could be caused by corruption of the tape, dirty
tape drive heads, faulty tape drives, or a software bug in the dump or restore
program.
8056 Tape format is bad (End volume label is not from this tape set).
The end volume label is invalid. This could be caused by corruption of the tape,
dirty tape drive heads, faulty tape drives, or a software bug in the dump or
restore program.
HP NonStop TMF Management Programming Manual—540140-008
Archive Tape Errors and Warnings
7-59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents