HP NonStop TMF Programming Manual page 625

Event Messages
331: ZTMF-EVT-Rcov-ExtSeg-Too-Small
A TMF recovery process, usually backout, has insufficient extended memory to
perform the required recovery. This occurs when a large number of data volumes (over
200) have been accessed by the recovery process.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
ZEMS-TKN-Emphasis
Event-Message Text
Process abending because of insufficient extended segment
size. Please increase the ExtENDEDSEGSIZE integer2 value by
10 MB.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
is the subject of the event message, and it identifies the TMF process that
generated the event. The value of this token for this event is ZTMF-VAL-PROC-
BACKOUT, ZTMF-VAL-PROC-VOLUMERECOVERY, or ZTMF-VAL-PROC-
FILERECOVERY.
ZEMS-TKN-Emphasis
is set to True for this event.
Effect
The recovery process abends, but TMF automatically restarts it. The same event may
be reissued, however, if you have not increased the value of the ExtENDEDSEGSIZE
integer2 parameter for the particular recovery process.
Recommended Action
Use a TMFCOM ALTER PROCESS command to increase the ExtENDEDSEGSIZE
integer2 parameter by 10.
If the failing recovery process is backout, use TACL to STOP all existing backout
processes. They will automatically restart with the new extended segment size
parameter.
HP NonStop TMF Management Programming Manual—540140-008
token-type ZSPI-TYP-Enum.
token-type ZSPI-TYP-Boolean.
6-353
Descriptions of Event Messages