HP NonStop TMF Programming Manual page 423

Event Messages
166: ZTMF-EVT-Rcov-Restart1
A volume or file recovery operation was interrupted by a disk process takeover for the
specified volume.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
ZTMF-TKN-RCOV-FileName-1
ZTMF-TKN-RCOV-Restart-Index
ZTMF-TKN-RCOV-Restart-Sno
ZTMF-TKN-RCOV-Restart-Rba
ZTMF-TKN-RCOV-Restart-Rba2
ZEMS-TKN-Emphasis
Event-Message Text
Restart condition encountered on audited volume
ZTMF-TKN-RCOV-FileName-1; restarting at audit trail index
#ZTMF-TKN-RCOV-Restart-Index, SNO #ZTMF-TKN-RCOV-Restart-Sno,
RBA #ZTMF-TKN-RCOV-Restart-Rba.
or
Restart condition encountered on audited volume
ZTMF-TKN-RCOV-FileName-1; restarting at audit trail index
#ZTMF-TKN-RCOV-Restart-Index, SNO #ZTMF-TKN-RCOV-Restart-Sno,
RBA #ZTMF-TKN-RCOV-Restart-Rba2.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
is the subject token of the event message, and it identifies the TMF process that
generated the event. For this event, the value of this token is either ZTMF-VAL-
PROC-VOLUMERECOVERY or ZTMF-VAL-PROC-FILERECOVERY.
ZTMF-TKN-RCOV-FileName-1
is the name of a data volume. Because of implementation dependencies, the token
ZTMF-TKN-RCOV-FileName-1 is actually used by this event to pass a volume
name.
ZTMF-TKN-RCOV-Restart-Index
contains an integer specifying an audit-trail index value (zero indicates the master
audit trail; one through 15 indicate auxiliary audit trails).
ZTMF-TKN-RCOV-Restart-Sno
contains an integer specifying an audit-trail file sequence number.
HP NonStop TMF Management Programming Manual—540140-008
token-type ZSPI-TYP-Enum.
token-type ZSPI-TYP-String.
token-type ZSPI-TYP-Int.
token-type ZSPI-TYP-Int2.
token-type ZSPI-TYP-Int2.
token-type ZSPI-TYP-Int4.
token-type ZSPI-TYP-Boolean.
6-151
Descriptions of Event Messages