HP NonStop TMF Programming Manual page 255

Commands and Responses
Tokens in Response Buffer
ZTMF-MAP-Status-Tmf
is an extensible structured token containing the status information for TMF. This
token contains the following fields:
ZSystemName
specifies the local system name.
ZSystemNumber
specifies the number of the local system.
ZSystemTime
specifies the local system time (GMT).
ZTmfState
specifies the state of TMF. The following values are possible:
ZTMF-VAL-TmfState-EmptyATCnfg
TMF has been brought up for the first time on this node and thus no
configuration exists for it, or a DELETE TMF command was performed.
(You must add at least one audit trail (by using the ADD AUDITTRAIL
command) to start TMF.)
ZTMF-VAL-TmfState-ConfigAT
TMF has not been started using this configuration. It is still possible to add
additional audit trails by using the ADD AUDITTRAIL command, or alter
previously added audit trails by using the ALTER AUDITTRAIL command.
ZTMF-VAL-TmfState-Stopped
TMF is stopped.
ZTMF-VAL-TmfState-Starting
TMF is starting and is in one of the conditions indicated by
ZStartingSTATE.
ZTMF-VAL-TmfState-Started
TMF is started.
ZTMF-VAL-TmfState-Stopping
TMF is stopping and is in one of the conditions indicated by
ZStoppingState.
HP NonStop TMF Management Programming Manual—540140-008
5-191
STATUS TMF