3Com VCX V7122 SIP User Manual page 63

Basic and Logging Parameters
Table 16
INI File Field Name
*
GUI Parameter Name
BootPRetries
EnableDiagnostics
EnableLanWatchDog
SysLogServerIP
(Network Settings>SysLog
Server IP Address)
EnableSyslog
(Network Settings>Enable
SysLog)
DisableRS232
3Com VCX V7122/SIP VoIP Gateway User Manual
Valid Range and Description
1 = Single BootP request
2 = 2 BootP retries - (3 seconds)
3 = 3 BootP retries - (default, 6 seconds)
4 = 10 BootP retries - (30 seconds)
5 = 20 BootP retries - (60 seconds)
6 = 40 BootP retries - (120 seconds)
7 = 100 BootP retries - (300 seconds)
15 = BootP retries forever
Number of BootP retries and then DHCP retries (if DHCPEnable = 1) at
Gateway startup.
The BootPRetries is a special Hidden parameter. Once defined and saved
in the flash memory, it is used even if it does not appear in the INI file.
Note that BootPRetries parameter becomes active after the VCX
V7122/SIP is reset and INI file is loaded. To change the parameters, first
modify the INI file, and then reset the Gateway.
0 = No diagnostics (default)
1 = Perform diagnostics
0 = Disable LAN WatchDog (default)
1 = Enable LAN WatchDog
The Gateway restarts if a LAN failure is detected
IP address in dotted format notation, for example, 192.10.1.255
0 = Disable SysLog (default)
1 = Enable SysLog
0 = RS-232 serial port is enabled (default)
1 = RS-232 serial port is disabled
For VCX V7122/SIP, the parameter must be set to 1 to disable the serial
port.
63