Syslog Operation - 3Com VCX V7122 SIP User Manual

SysLog Operation

Sending the SysLog Messages
The 3Com SysLog client, embedded in the firmware of the VCX V7122/SIP, sends error
reports/events generated by the VCX V7122/SIP unit application to a SysLog Server, using
IP/UDP protocol. 3Com does not provide a SysLog Server. Examples of SysLog Servers
downloadable from the Internet:
Kiwi Enterprises: http://www.kiwi-enterprises.com/software_downloads.htm
The US CMS Server:
TriAction Software:
Netal SL4NT 3.0 Syslog Daemon:
A typical SysLog Server application enables filtering of the messages according to priority, IP
sender address, time, date, and so on.
Setting the SysLog Server IP Address
A SysLogServerIP Address parameter is supplied using a web browser or from an INI file in
order to determine the address of the SysLog Server.
Controlling the Activation of the SysLog Client
Activation of the SysLog client is controlled by an EnableSyslog INI file parameter. Setting it
to 1 enables the SysLog protocol log.
The INI File Example for SysLog
SyslogServerIP = 10.2.0.136
EnableSyslog = 1
134
http://uscms.fnal.gov/hanlon/uscms_Server/
http://www.triaction.nl/Products/SyslogDaemon.asp
http://www.netal.com/
3Com VCX V7122/SIP VoIP Gateway User Manual