Controller Displays "Probe Error - Garland XG24-JIB Service Manual

TECHNICAL TROUBLESHOOTING

Controller displays "PROBE ERROR"

Controller displays "Probe
ERROR" when grill is turned
on.
NO
Controller displays "Probe
ERROR" during normal operation.
Part # JIBSM08 Rev.6 (08/04/09)
Disconnect suspected
thermocouple and check
YES
continuity.
NO
Has suspected
YES
zone overheated?
YES
See Technical
Troubleshooting -
"HEATING ERROR"
continued
YES
NO
Check all connections on
thermoscouple interface
board.
NO
Compare Millivolt reading of
suspect thermocouple
will Millivolt chart.
NO
Replace e ected
zone thermocouple.
Replace damaged thermocouple
Re-establish
YES
positive connection
Page 39