PLATEN ZEROING
Platen leveling should be done from one corner
to the opposite corner. The adjuster nuts should
be turned opposite of one another.
Platen Adjuster Cap (PN 1859102)
Platen Adj Lock Nut (PN 1859103)
Shoulder Bolt (PN 8005401)
Platen Adjuster Nut (PN 1859101)
Part # JIBSM08 Rev.6 (08/04/09)
continued
This end to remove Adjuster
Locking Cap
This end to remove Grease Cap
and to make adjustments to the
adjuster nuts
Platen Gapping Tool (PN 1838701)
"No-Go"
"Go"
Platen Adjusting Tool (PN 4523323)
Page 17