Table of Contents
Advertisement
No.
Names
HDMI output
(9)
(HDMI OUT)
(10) Power LED (PWR)
Status LED
(11)
(RDY)
AV input status LED
(12)
(INDWN)
Alarm LED
(13)
(ALM)
Voice input/output
(14)
(VOICE)
(15) LCD panel
(16) LCD brightness controller
Direction key
(17)
(△▽
)
Enter key
(18)
(Enter)
Cancel key
(19)
(Cancel)
(20) Power button
Power inlet connector
(21)
(INPUT 100-240VAC)
(22) AC cord clamp hole
FG terminal
(23)
(FG )
(24) FAN
Audio input
(25)
(ANALOG AUDIO IN)
(26)
(L), (R)
(27)
Audio output
(ANALOG AUDIO OUT)
(28)
(L), (R)
RS-232C port
(29)
(232C)
Digital HDMI video output terminal. 50Ω unbalanced.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Turns on when the device is powered on.
Turn on when IP-9500e power is on. For more information, see Table 5.3,
"Details of LED Indications," in Section 5.2.
Audio/Video input setting status indicator and LED that indicates the input off
status during input setting. For more information, see Table 5.3, "Details of
LED Indications," in Section 5.2.
Turns on when IP-9500e operation is abnormal. For more information, see
Table 5.3, "Details of LED Indications," in Section 5.2.
Voice communication (Intercom) port between IP-9500s.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Uses to set IP-9500e up and displays status. 2 lines x 20 characters.
Adjusts the brightness of LCD panel.
Uses to operate IP-9500e and check the status.
See Section 3.4, "Device Setting and Operation (Front Panel)" for more
explanation.
Used to finalize the displayed data on the front panel.
See Section 3.4, "Device Setting and Operation (Front Panel)" for more
explanation.
Used to cancel the displayed data on the front panel.
See Section 3.4, "Device Setting and Operation (Front Panel)" for more
explanation.
Turns the device on and off.
Can be connected to a 100-240VAC commercial power supply by using power
card with a standard two-prong plug with ground.
See Section 2.2.2, "Connection to a Power Source," for an explanation on using
this connector. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Hole to fix AC cord clamp.
See Section 2.2.2, "Power Supply System Connection" for more information.
Use for an FG connection to the device.
See Section 2.2.1, "Connection to ground," for an explanation on using this
terminal.
Maintenance-free FAN that cools the inside of the device.
Balanced audio input terminal.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Balanced audio output terminal.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
RS-232C data communication port.
See Section 2.5, "Connection to an RS-232C Device," for an explanation on
using this pin. See Section 4.2, "Cable and Connector Details," for cable
connection information.
7
Chapter 1 Preparations
Description
IP-9500e
Advertisement
Table of Contents
