Fujitsu IP-9500e User Manual page 32

Chapter 2 Installation and Connection
MODEL Input
North 100-
America 120V
<*1>
<*2>
200-
240V
Europe 100-
<*2> 240V
Aus- 100-
tralia 240V
U.K 100-
<*2> 240V
Japan 100V
Korea
220V
(Class I)
220V
(Class II)
Note: *l. Be sure that the detachable proper Supply cord has the approval of the
appropriate safety agencies of the country where the equipment will be used.
*2. Cable length of above Power Supply cord shall be shorter than 4.5 m.
IP-9500e
USABLE DETACHABLE POWER SUPPLY CORD SET
Connector
IEC C-13
Rated 13A, 125V
UL, CSA Approved
IEC C-13
Rated 15A, 250V
UL, CSA Approved
IEC C-13
Rated 10A, 250V
<*1>
IEC C-13
Rated 10A,
250V
IEC C-13
Rated 10A,
250V
IEC C-13
Rated 13A,
125V
METI Approved
or <PSE>
P S
E
IEC 60320-1
(IEC C-13)
Rated 12A, 250V
or
IEC 60320-1
(IEC C-13)
Rated 3A, 250V
or
Cord
Type SJT, No.16 AWG Min.
3-Conductors
(Single phase;2-current carrying
conductors & ground)
UL, CSA Approved
Type SJT, No.14 AWG Min.
3-Conductors
(Single phase; 2-current carrying
conductors & ground)
UL, CSA Approved
CENELEC OC
3X1.0 square mm<*1>
<HAR>
Cable: AS OD 3 X1.0 square mm
e.g.
BS OC 3 X1.00 square mm
Type HVCTF cross section area
1.25 square mm
3-Conductors
(Single phase;2-current
carrying conductors & ground)
METI Approved
or <PSE>
P S
E
Comply with KSC3304.
Type VCTF cross section area 1.25
(0.50 or 1.00 or 2.00) square mm
3-Conductors
(Single phase;2-current
carrying conductors & ground)
or
Comply with KSC3304.
Type VCTFK cross section area
1.25 (0.50 or 0.75 or 1.00 or 2.00)
square mm
2-Conductors
or
18
Attachment Plug cap
NEMA (5-15P)
parallel blade
Rated 13A, 125V
UL, CSA Approved
NEMA (6-15P)
tandem blade
Rated 15 A, 250 V
UL, CSA Approved
Rated 10 A, 250 V
<*1>
Rated 10 A, 250 V
Rated 10 A. 250 V
ASA
or
NEMA (5-15P)
parallel blade
Rated 13 A, 125 V
METI Approved
or <PSE>
P S
E
Comply with KSC8305.
Rated 12A, 250V
or
Comply with KSC8305.
Rated 12A, 250V
or