Software Management - Fujitsu IP-9500e User Manual

3.3.3 Software management

Click Software management in the left frame of the browser screen to display the software
management page in the right frame of the browser screen, where you can install software or restore,
save, or delete configuration data.
■Software
Specify an update file and enter the license key, and then click the
installing the software.
■Configuration (configuration data)
●Restoring all the configuration data
Specify the file containing the configuration data and then click the
all the configuration data saved in the past.
●Saving all the configuration data
All the configuration data currently stored on the device can be saved to a PC by clicking the
button.
●Deleting all the configuration data
Clicking the
Information such as IP addresses is also reset to the initial values with which the device was shipped
from the factory.
Changing (restoring or deleting) the configuration data, in some cases, changes IP
NOTE:
addresses, subnet masks, and the gateway address. Be careful because doing this may
cause an unexpected problem with your network.
button deletes all the configuration data currently stored on the device.
39
Chapter 3 Operation instructions
button to start
button to restore
IP-9500e