Fujitsu IP-9500e User Manual page 22

Chapter 1 Preparations
No. Names
SDI video input
(30)
(SDI IN)
SDI video output
(31)
(SDI OUT)
Video output
(32)
(ANALOG VIDEO OUT)
Reference clock signal
(33) input
(GENLOCK IN)
(34) Optional card slot
(35) Blank panel
(36) Screws
IP-9500e
Digital HD-SDI video input terminal. 75Ω unbalanced.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Digital HD-SDI video output terminal. 75Ω unbalanced.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Analog video output terminal. 75Ω unbalanced.
See section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
External clock signal input terminal. 75Ω unbalanced.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Optional card slot.
Remove when the optional card is equipped. See Section 2.7, "Optional card
insertion" for removing or insertion of the optional card.
Screws to fix the optional card. See Section 2.8, "Optional card insertion" for
removing or insertion of the optional card.
8
Description