Fujitsu IP-9500e User Manual page 35

For HDMI input, there is one HDMI terminal to connect the video and audio output device.
Connect to HDMI IN on the front panel of IP-9500e using the HDMI cable. The signal is terminated
in 50Ω.
For voice communication between IP-9500e, there is one voice terminal to connect the voice
communication device (e.g., intercom).
Connect to VOICE terminal on the front panel of IP-9500e using the dedicated adaptor cable with the
bidirectional voice communication terminal (RJ25 – XLR). The impedance is terminated in 600Ω.
There are two types of the cables. Procure the appropriate type separately because this cable is not
attached to IP-9500e. For more information, see Section 4.2, "Cable and Connector Details."
For details of the connector and cable, see Section 4.2, "Cable and Connector
NOTE:
Details." For the electric specifications, see Appendix 2.3, Function Specifications."
LINK/ACT 100/1000M LINK/ACT 100/1000M
LINK/ACT 100/1000M LINK/ACT 100/1000M
Audio & Video
Output Device
OR
Type 1
PUSH PUSH
Audio Input
Audio Output
Device
Device
21
Chapter 2 Installation and Connection
Type 2
Audio Input
Device
IP-9500e