Weekly Timer Operation - Fujitsu Inverter Halcyon 9319356051 Operating Manual

WEEKLY TIMER OPERATION

Using in these cases of WEEKLY timer
The "OFF Timer" at which the operation will be stopped and the "ON Timer" at which the operation will be started can be combined,
and up to 4 reservations (program
Before creating the program, please adjust the week and time fi rst, and than send it to the air conditioner.
If the week and time are not adjusted, the program will not be operated at the set time.
Please refer to [Set the day of the week and current time] (page 6).
Example of how to set the timer 1
Monday to Friday
Program Set the ON Timer with a temperature of 74°F for 7:00 AM. Program
Program Set the ON Timer with a temperature of 78°F for 5:00 PM. Program
Saturday
Program ~ No timer settings.
Sunday
If you set the OFF Timer for Program
Program
7:00 AM ON 74°F
Monday to
Wake up
Friday
Saturday
Sunday ON
Example of how to set the timer 2
You can specify a given temperature in the ON setting in WEEKLY TIMER.
* You can set the temperature for Auto, Cool, and Dry within the range 64–88 °F, for Heat the range is 50 or 60–88°F.
Even if you set 50, 60, or 62 °F, if you run the product on Auto, Cool, or Dry it will run at 64 °F.
During the heating season, even if you confi gure detailed settings with the temperature low when there is no one in the room and
high when there is someone there, the air conditioning will automatically switch over.
Program
7:00 ON 72 °F
● Operations other than the temperature setting will be the same at the last time operation was stopped,
CAUTION
● If you set the ON Timer and OFF Timer on the same and for the same time, the air conditioner will run
● If there is a power interrupting, such as due to a power outage during the WEEKLY timer setting or a
● You cannot use the ON/OFF together with the SLEEP timer.
En-16
) can be applied for one day, and 28 reservations for a week.
at 9:00 AM, Program
Program
9:00 AM OFF
Program
ON
9:00 AM OFF
Program
9:00 ON 76 °F
so Cooling → Heating → Cooling → Heating type of operations cannot be automatically set.
the ON Timer. If two ON Timers are set at the same time, the air-conditioning will run the program that
was set earlier.
circuit breaker cutting out, the internal timer of the air-conditioning will be incorrect. (See "AUTO Restart"
on page 23.) In such a case, the main timer lamp will notify you of this by fl ashing, so carry out matching
of the time and date. (See "Set the day of the week and current time" on page 6.)
If you want to run the product on WEEKLY TIMER after the time is up after using the ON/OFF Timer,
Program Timer, or SLEEP Timer within the WEEKLY TIMER, you need to set the WEEKLY TIMER again.
(See page 19.)
at 11:00 AM, Program
Program
Leave for work
5:00 PM ON 78°F
Come back
home
No timer settings
Program
ON
11:00 AM OFF
Program
17:00 ON 80 °F
Set the OFF timer for 9:00 AM.
Set the OFF timer for 11:00 PM.
at 5:00 PM, and Program
Program
11:00 PM OFF
Program
ON
5:00 PM OFF
Program
23:00 ON 76 °F
at 11:00 PM.
Go to sleep
Program
11:00 PM OFF