WEEKLY TIMER OPERATION
Using in these cases of WEEKLY timer
The "OFF Timer" at which the operation will be stopped and the "ON Timer" at which the operation will be started can be combined,
and up to 4 reservations (program
Before creating the program, please adjust the week and time ¿ rst, and than send it to the air conditioner.
If the week and time are not adjusted, the program will not be operated at the set time.
Please refer to [Set the day of the week and current time] (page 6).
Example of how to set the timer 1
Monday to Friday
Set the ON Timer with a temperature of 24°C for 7 am. Program
Set the ON Timer with a temperature of 26°C for 5 pm. Program
No timer settings.
If you set the OFF Timer for Program
7:00 ON 24°C
Example of how to set the timer 2
You can specify a given temperature in the ON setting in WEEKLY TIMER.
* You can set the temperature for Auto, Cool, and Dry within the range 18-30°C, for Heat the range is 10 or 16-30°C.
Even if you set 10, 16, or 17°C, if you run the product on Auto, Cool, or Dry it will run at 18°C.
During the heating season, even if you con¿ gure detailed settings with the temperature low when there is no one in the room and
high when there is someone there, the air conditioning will automatically switch over.
7:00 ON 22°C
) can be applied for one day, and 28 reservations for a week.
at 9:00, Program
9:00 ON 24°C
● Operations other than the temperature setting will be the same at the last time operation was stopped,
● If you set the ON Timer and OFF Timer on the same and for the same time, the air conditioner will run
the ON Timer. If two ON Timers are set at the same time, the air-conditioning will run the program that
was set earlier.
● If there is a power interrupting, such as due to a power outage during the WEEKLY timer setting or a
circuit breaker cutting out, the internal timer of the air-conditioning will be incorrect. (See page 23 "AUTO
Restart".) In such a case, the main timer lamp will notify you of this by À ashing, so carry out matching of
the time and date. (See page 6 "Set the day of the week and current time".)
● You cannot use the ON/OFF together with the SLEEP timer.
If you want to run the product on WEEKLY TIMER after the time is up after using the ON/OFF Timer,
Program Timer, or SLEEP Timer within the WEEKLY TIMER, you need to set the WEEKLY TIMER again.
(See page 19.)
Set the OFF timer for 9 am.
Set the OFF timer for 11 pm.
at 11:00, Program
Leave for work
17:00 ON 26°C
No timer settings
17:00 ON 26°C
Heating type of operations cannot be automatically set.
at 17:00, and Program
23:00 ON 22°C
Go to sleep
4/27/2012 1:16:05 PM