Polycom SpectraLink 6000 System Interface Manual page 15

Program Mitel
PN: 1725-36137-001_E.doc
The handset function menu default settings are shown in the table
below; these may be changed as described above in Function Menu
Programming. Some of these functions (Mute, Redial, Forward, etc.)
are activated by softkeys or
6000 and SpectraLink 8020/8030 Wireless Telephones.
FCN + 1
MUTE
FCN + 3
REDIAL
LINE + 0
CANCEL
FCN + 9
EXIT MENUS
The Mitel Technician should perform the necessary customer data
entry, through an ASCII administration terminal or through the
attendant console.
• Use Form 09 to program each handset as station type 420.
• Program the keys (line and call appearances and features)
according to the pre-installation planning.
If the handsets have no speaker, disable speakerphone features
•
such as autoanswer, background music, and headset operation.
The installer can now test the handsets:
The handset will not support remote diagnostic tests (e.g., loopback
testing.)
menu options on the SpectraLink
FCN
FCN + 2
XFER/CONF
FCN + 4
MSG
LINE + *
SUPERKEY
Interface Implementation
15