Setting The Baud Rate - Pioneer PDP-502MX Manual

9) Setting the baud rate

When controlling or adjusting the unit from a PC, the RS-232C port can be set to one of five baud rates: 1200, 2400,
4800, 9600, and 19200 BPS.
Factory preset:
1 Enter the integrator mode (refer to section 5.4.1, "About
the integrator mode").
The ID number of the unit of adjustment items will be indicated
in the upper right corner of the screen, where "– –" is displayed
in the illustration.
Select OPTION 2.
2 Move the cursor to "BAUD RATE" and change the mode
with the SET button.
You can cycle through the available values by repeatedly
pressing the SET button:
1200 BPS = 2400 BPS = 4800 BPS = 9600 BPS =
19200 BPS = ···
BAUD RATE applies to all inputs (INPUTs 1 to 4).
Select EXIT in screen 2 to return to screen 1.
Set the unit baud rate to match that of the PC in use.
With long RS-232C cables, we recommend using lower baud rates.
4800 BPS
Screen 1
MENU
PICTURE
WHITE BAL.
SCREEN
]
SIDE MASK
OPTION 1
3OPTION 2
SUB VOLUME
ALL DEFAULT
Screen 2
OPTION 2
OSD
3BAUD RATE
]
FULL MASK
FAN CONTROL : AUTO
TEMPERATURE :
HOUR METER
EXIT
Integrator Mode
– –
– –
: ON
: 4 8 0 0 BPS
: OFF
: 3 4 5 HRS
119