Adjusting The White Balance - Pioneer PDP-502MX Manual

Integrator Mode

2) Adjusting the WHITE BALANCE

The items that can be adjusted here are R HIGH, G HIGH, B HIGH, R LOW, G LOW and B LOW.
1 Before entering the integrator mode, switch the unit to the
specific input (one of INPUTs 1 to 4) in which adjustments
will be made (refer to section 5.4.1, "About the integrator
mode").
The ID number of the set of items will be indicated in the
upper right corner of the screen, where "– –" is displayed
in the illustration.
Select WHITE BALANCE.
2 Select the desired adjustment item.
Select DEFAULT on Screen 2 to return all of the WHITE
BALANCE adjustment values to their factory preset values.
Push the 2 button on the remote control or the operating
panel on the main unit to return to screen 1.
3 Make the necessary adjustments.
Make the adjustments using the 2 and 3 buttons on the
remote control or the operating panel of the main unit.
Press the SET button to return to screen 2.
<Adjustable range>
112
0 to 255 for every item
Screen 1
MENU
PICTURE
3WHITE BAL.
]
SCREEN
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
ALL DEFAULT
Screen 2
MENU
3R HIGH
PICTURE
WHITE BAL.
SCREEN
]
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
ALL DEFAULT
Screen 3
WHITE BALANCE
3CONTRAST : 128
PICTURE
WHITE BAL.
SCREEN
]
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
DEFAULT
MENU : MENU OFF
R HIGH
– –
: 128
R HIGH
: 128
G HIGH
: 128
B HIGH
: 128
R LOW
: 128
G LOW
B LOW : 128
DEFAULT
– –
: 128
: 128
G HIGH
: 128
B HIGH
: 128
R LOW
: 128
G LOW
B LOW : 128
DEFAULT
– –
: 128
BRIGHT
: 132
COLOR
: 132
TINT
: 128
SHARP
DETAIL : 128
RESET
128