Setting Up Peripheral Equipment - Pioneer PDP-502MX Manual

5) Setting up peripheral equipment

The unit is equipped with a function for automatically identifying whether the input signal is a PC signal or a video
signal from something like a DVD player from the input signal frequency. However in the case of 31.5k / 60Hz video
signal input or 640 x 480 / 60Hz PC signal input this function does not operate.
In such cases, it is necessary to switch over the setting manually.
This setting needs to be made separately for INPUT 3 and INPUT 4.
(Examples) • When connecting AV unit
• When connecting PCs
Set-able condition
Factory preset
1 Select SETUP.
Screen 1
MAIN MENU
PICTURE
SCREEN
ALL RESET
POWER SAVE
3SET UP
MENU : MENU OFF
5∞ 3
: SELECT
(NOTE) No setting of INPUT 1 and 2 possible
(INPUT 1 and 2 do not correspond to PC signal)
: INPUT 3 or 4
31.5 Hz horizontal, 60 Hz vertical at signal
input time (no automatic switching)
: INPUT 3 : PC
INPUT 4 : PC
CONTRAST : 0
: 0
BRIGHT
: 0
COLOR
: 0
TINT
: 0
SHARP
RESET
SET : NEXT
= SETTING : VIDEO
= SETTING : PC
2 Move the cursor to SETTING and change the
setting using the SET button.
Pressing the SET button toggles the setting
between VIDEO and PC.
Screen 2
SET UP
TERMINAL
3SETTING
SIGNAL
CLAMP
HIGH CONTRAST : OFF
EXIT
5∞ 3
: SELECT
Menu Mode
: BNC
: VIDEO
: RGB
: MODE 1
SET : CHANGE
101