Adjustments And Settings In The Integrator Mode; Adjusting The Picture - Pioneer PDP-502MX Manual

5.4.3 Adjustments and settings in the integrator mode

For detailed information on button operations, refer to section 5.4.2, "Example of integrator mode operation".

1) Adjusting the PICTURE

The items that can be adjusted here are CONTRAST, BRIGHT, COLOR, TINT, H. SHARP and V. SHARP. These are
slightly different to the items that can be adjusted in the case of PICTURE adjustments from menu mode (see the
instruction manual).
1 Before entering the integrator mode, switch the unit to the
specific input (one of INPUTs 1 to 4) in which adjustments
will be made.
(Refer to section 5.4.1, "About the integrator mode".)
The ID number of the unit of items will be indicated in the
upper right corner of the screen, where "– –" is displayed
in the illustration.
Select PICTURE.
2 Select the desired adjustment item.
Select DEFAULT on Screen 2 to return all of the PICTURE
adjustment values to their factory preset values.
Push the 2 button on the remote control or the operating
panel of the main unit to return to screen 1.
3 Make the necessary adjustments.
(NOTE) When in INPUT 3 or 4 (while receiving PC signals),
COLOR, TINT, H. SHARP, and V. SHARP adjustments
cannot be performed.
Make the adjustments using the 2 and 3 buttons on the
remote control or the operating panel of the main unit.
The values selected here become the center values for
adjustment in menu mode. Moreover, if you adjust SHARP
in menu mode then the amount adjusted will be added to
both the H. SHARP and the V. SHARP adjustment values in
integrator mode.
Press the SET button to return to screen 2.
<Adjustable range> 0 to 255 for CONTRAST, BRIGHT, H. SHARP, and V. SHARP
0 to 63 for COLOR and TINT
Screen 1
MENU
3PICTURE
WHITE BAL.
SCREEN
]
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
ALL DEFAULT
Screen 2
MENU
3CONTRAST : 128
PICTURE
WHITE BAL.
SCREEN
]
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
ALL DEFAULT
Screen 3
PICTURE
3CONTRAST : 128
PICTURE
WHITE BAL.
]
SCREEN
SIDE MASK
OPTION 1
OPTION 2
SUB VOLUME
DEFAULT
MENU : MENU OFF
CONTRAST
Integrator Mode
– –
CONTRAST : 128
: 128
BRIGHT
: 132
COLOR
: 132
TINT
H. SHARP : 128
V. SHARP : 128
DEFAULT
– –
: 128
BRIGHT
: 132
COLOR
: 132
TINT
H. SHARP : 128
V. SHARP : 128
DEFAULT
– –
: 128
BRIGHT
: 132
COLOR
: 132
TINT
: 128
SHARP
DETAIL : 128
RESET
128
111