Abl On/Off - Pioneer PDP-502MX Manual

Menu Mode

8) ABL ON/OFF

Setting ABL: ON during playback of PC signals increases screen brightness.
If you set "ABL to ON" then the peak brightness will rise, and in addition the brightness of the pictures produced by
input signals will change.
If the change is unsatisfactory, set ABL: OFF.
Differences between ABL ON and OFF (illustration):
ABL: OFF
The intensity levels of input signals are
faithfully reproduced.
Set-able condition
Factory preset
1 Select SETUP.
MAIN MENU
PICTURE
SCREEN
ALL RESET
POWER SAVE
3SET UP
MENU : MENU OFF
5∞ 3
: SELECT
104
: PC signals supplied.
: ON
CONTRAST : 0
: 0
BRIGHT
: 0
COLOR
: 0
TINT
: 0
SHARP
RESET
SET : NEXT
ABL: ON
For images with relatively high overall brightness,
no significant change occurs (upper figure). But
for dimmer images, peak intensity images are
brighter when reproduced (lower figure).
2 Move the cursor to ABL and use the SET button
to change the current setting.
Pressing the SET button toggles between ON
and OFF.
Screen 2
SET UP
TERMINAL : D-SUB
SETTING : PC
SIGNAL : RGB
CLAMP : MODE 1
3ABL
: OFF
H. ENHANCE : 0
V. ENHANCE : 0
EXIT
5∞ 3
: SELECT SET : CHANGE