NordicTrack Smart Terrain 12.0 NTEL01310.3 User Manual page 24

HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug the included
audio cable into the jack on the console and into a
jack on your MP3 player or CD player; make sure
that the audio cable is fully plugged in.
Next, press the Play but-
ton on your MP3 player or
CD player. Adjust the vol-
ume level using the
Volume increase and
decrease buttons on the
console or the volume control on your MP3 player or
CD player.
HOW TO CHANGE CONSOLE SETTINGS
The console features a user mode that keeps track of
elliptical information and allows you to personalize
console settings.
To select the user mode, hold down the Fan increase
button until the user mode information appears in the
display.
The time display will show the total number of hours
that the elliptical has been used.
The distance display will show the total distance (in
thousands of strides) that the pedals have moved.
The lower section of the display will show the status of
an iFit Live module. If a wireless iFit Live module is
connected, the display will show the words WIFI
MODULE. If a USB module is connected, the display
will show the words USB/SD MODULE. If no module
is connected, the display will show the words NO IFIT
MODULE.
The matrix will show the selected unit of measure-
ment. To change the unit of measurement, press the
Enter button repeatedly. To view distance in kilome-
ters, select METRIC. To view distance in miles, select
ENGLISH.
Press the decrease button above the Enter button.
The display will show the contrast level of the display.
Press the Incline/Decline increase and decrease but-
tons to adjust the contrast level.
The following settings can be viewed and changed
when an iFit Live module is connected:
Press the decrease button next to the Enter button to
view the status of the personal trainer voice. To turn
on or turn off the voice, press the Enter button.
Press the decrease button next to the Enter button to
view the default menu. The default menu will appear
when you turn on the power. Press the Enter button
repeatedly to select the manual main screen or the iFit
Live main screen as the default menu.
Press the decrease button next to the Enter button to
view the next setting. Then, press the Enter button to
check the connection status of an iFit Live module.
If a wireless iFit Live module is connected, the display
will show the words WIFI STATUS and the signal
strength. If a USB module is connected, the display
will show the words USB STATUS. If the module is not
detected, the display will show the words NO
MODULE DETECTED.
Press the decrease button next to the Enter button to
view the next setting. To send and receive workouts,
workout logs, and updates using a wireless iFit Live
module, press the Enter button. When the process is
finished, the words TRANSFERS DONE will appear in
the display.
To exit the user mode, press the Fan increase button.
24