How To Use The Elliptical - NordicTrack Smart Terrain 12.0 NTEL01310.3 User Manual

HOW TO USE THE ELLiPTiCAL
HOW TO PLUG IN THE POWER CORD
This product must be grounded, if it should mal-
function or break down, grounding provides a path of
least resistance for electric current to reduce the risk
of electric shock, This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug.
Plug the power cord into an appropriate outlet that
is properly installed and grounded in accordance
with all local codes and ordinances. This product
is for use on a nominal 120-volt circuit.
IMPORTANT: The elliptical is not compatible with
GFCl-equipped outlets and may not be compatible
with AFCl-equipped outlets.
A temporary
adapter may Outlet Box
be used to
connect the
power cord
to a 2-pole
receptacle as
shown at the
right if a Lug
properly Metal Screw
grounded
outlet is not
available. The temporary adapter should be used only
until a properly grounded outlet can be installed by a
qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in
place by a metal screw. Some 2-pole receptacle out-
let box covers are not grounded. Contact a
qualified electrician to determine if the outlet box
cover is grounded before using an adapter.
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, moving
it requires two persons. Stand in front of the ellipti-
cal, hold the upright, and place one foot against one of
the front wheels. Pull on the upright and have a sec-
ond person lift the handle on the ramp until the
elliptical will roll on the front wheels. Carefully move
the elliptical to the desired location, and then lower it
to the floor.
Pull on the
upright
Place
your foot
here
Lift here
16