Controls; Convection - GE Monogram ZET1R Owner's Manual

Introduction to the Oven Controls
Wall Oven
(Throughout this manual, features and appearance may vary from your model.)
Touch Screen
Touch the graphics on
the interactive display to
use the oven features.
(
(
SELECT COOK MODE
,
,
RE_, i KITCHEN |
I -e
Double oven control shown.
Touch
screen,
touch pads
and time of
day display
NOTE: If the oven is inactive for 10 minutes,
the Touch Screenwill go into standby mode, and
the screen will be dark. Touch the Touch Screen
or any pad to "wake up" the display.The Display
may also "wake up" when it sensesyou (your hand)
approaching the Touch Screen.The display is
sensitive and may "wake up" when lights are turned
on or due to the movement of nearby people or
objects. The Displayshould return
to its standby mode after 10 minutes if no further
interaction occurs.
Touch Screen
1 BAKE. Touch to selectthe bake function.
BROIL. Touch to selectthe broil function (HIGH
BROIL or LOWBROIL) or the BROIL GUIDE.
FAVORITE RECIPE.Touch to use, create,
rename, modify or delete a favorite recipe.
PROBE. Touch when using the probe to
cook food.
5 CONVECTION BAKE. Touch to select baking
with the convection function,
6 CONVECTION ROAST.Touch to select roasting
with the convection function.
7 KITCHEN TIMER. Touch to select the timer
feature.
8 SELF CLEAN. Touch to select the self-cleaning
function. See the Using the Self-Cleaning Oven
section.
Touch Pads
9 HOME Pad, Touch to return to the "SELECT
COOKMODE"(Home) Screen.This does not
cancel any cooking or self-clean settings.
10 HELP Pad. Touch this pad to find out more
about your oven's features.
11 BACK Pad. Touch to return to the previous
screen.
12 CLEAR/OFF Pad. Touch to cancel ALL oven
operations except the clock and timer.
1:3 OVEN LIGHT On/Off Pad{s). Touch to turn the
oven light(s)on or off.
1/4 OPTIONS Pad. Touch to select
TWOTEMPS,DELAY START, P ROOF, D EHYDRATE,
WARM,COOK& HOLD,SABBATH or SE-i-rlNGS.
Display
15 Display. Shows the time of day.
Error Codes
If"F- and a number or letter" flash in the display
end the oven control signals, this indicates a
function error code. Touch the CLEAR/OFFpad.
Allow the oven to cool for one hour. Putthe oven
back into operation. If the function error code
repeats, disconnect the power to the oven and
call for service.
If there has been a power outage:
If your oven was set
for ci
timed oven operation
and a power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when there
has been a power outage.