Runco XtremeProjection X-200i Installation & Operation Manual page 105

Table 6-2. Serial Commands (continued)
Operation
3D.syncdelay
3D.syncinvert
power.chime
errcode
lamp.vol
cinewide
red.hsg.hue
yellow.hsg.hue
green.hsg.hue
cyan.hsg.hue
blue.hsg.hue
magenta.hsg.hue
red.hsg.sat
yellow.hsg.sat
green.hsg.sat
cyan.hsg.sat
blue.hsg.sat
magenta.hsg.sat
red.hsg.gain
yellow.hsg.gain
green.hsg.gain
cyan.hsg.gain
blue.hsg.gain
magenta.hsg.gain
white.red.gain
white.green.gain
white.blue.gain
msgbox
Runco X-200i Series Installation/Operation Manual
Commands
= ?
100 +/- 40 ms
= ?
0 = Normal
1 = Inverted
= ?
0 = Off
1 = On
?
Refer to RS-232 Error Codes
on page 91.
?
<string>
= ?
0 = Off
1 = CineWide
2 = AutoScope
= ?
0-200
= ?
0-200
= ?
0-200
= ?
0-200
= ?
0 = On
1 = Off
Values
returns lamp voltage
Personal Color Equalizer (PCE)
hue settings.
Personal Color Equalizer (PCE)
saturation settings.
Personal Color Equalizer (PCE)
level settings.
Personal Color Equalizer (PCE)
white balance settings.
This control enables or disables
the display of power off, source
and adjustment message boxes
(brightness, contrast etc.). Default
value is ON.
89
External Control
Notes