Table of Contents
Advertisement
FS-8700-41 Simplex 4100 Driver Manual
Error Message
Sim4100:#34. Bad Seq. Sequence number reset.
Sim4100:#36. FYI. Bad sim4100_func=%d in
MapDesc=<%s>
Sim4100:#38. FYI. Bad sim4100_func=%d in
MapDesc=<%s>
Sim4100:#39 FYI. Data abandoned! State not
recognized. Mapdesc=<%s>
Sim4100:#40 FYI. Data abandoned! Array too
short.(%d) Mapdesc=<%s>
Sim4100:#41 FYI. Data abandoned! Array too
short.(%d) Mapdesc=<%s>
Sim4100:#43. Err. Can only monitor %d point(s)
for ClearAll
Sim4100:#44 FYI. ClearAll mapDesc's must be
passive
Sim4100:#45
FYI.
User
attribute=<%s> offset=%d method=%d
Sim4100:#46 Err. No space. Driver rejects SHOW
attribute=<%s> offset=%d method=%d
Sim4100:#47 Err. Duplicate. Driver rejects SHOW
attribute=<%s> offset=%d method=%d
Sim4100:#48 FYI. User added SHOW attr
state=<%s> value=%d
Sim4100:#49 Err. No space. Driver rejects SHOW
attr state=<%s> value=%d
Sim4100:#50 Err. Duplicate. Driver rejects SHOW
attr state=<%s> value=%d
sim4100:#51 Err. Length must be specified and >
0.
SIM4100:#52 FYI. Incoming Abandoned. Node
offline
Sim4100:#53. Md=<%s> Abandoned. Polling was
inhibited.
Sim4100:#54. Err. SeqNumber check disabled.
Sim4100:#55. Error. Bad Sim4100_Func=%d in
MD=<%s>
Sim4100:#56
Sim4100:#57* Err. Cant parse Login message.
Ignored.
Sim4100:#58 FYI. You could have used an Array
called <%s> to expose diagnostic info.
Sim4100:#59 Err. Checkpoint. Report this to Tech
Support.
Sim4100:#60 Err. MapDesc=%s. No Node.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
Description
Message sequence number incorrect. Check Simplex User Manuals, and
driver manuals. Contact FieldServer Technologies for additional support.
Check the CSV file for the correct Simplex function type.
Check the CSV file for the correct Simplex function type.
Attribute was found, but State not found in driver table.
FieldServer Technologies for additional support.
Check the CSV file Data Array lengths
Check the CSV file Data Array lengths
Contact FieldServer Technologies for additional support.
Map Descriptor function has been changed automatically
added
SHOW
No space is available in internal driver table.
Technologies for additional support.
Duplicate found in internal driver table. Contact FieldServer Technologies
for additional support.
No space is available in internal driver table.
Technologies for additional support.
Duplicate found in internal driver table. Contact FieldServer Technologies
for additional support.
Check the CSV file for the length fields.
Check the CSV file for node definitions, Simplex hardware, and
connections. A device node appears to be offline. Contact FieldServer
Technologies for additional support.
Obsolete. Contact FieldServer Technologies for support.
Sequence number checking was disabled. Check your password. Contact
FieldServer Technologies for support.
Check the CSV file for the correct Simplex function type.
Not used.
The driver ignored Login messages. No corrective action is required. This
message is printed for your information only.
This message is printed for your information only. It can safely be
ignored. For additional information read section "Appendix C.3.2 Driver
Exposed Stats"
An internal driver diagnostic has been triggered. You must report this
error to FieldServer's Technical Support.
Every Sim4100 Map Descriptor must be connected to a node. Ensure that
the parameter 'Node_Name' has been specified on the Map Descriptor.
Page 37 of 48
Contact
Contact FieldServer
Contact FieldServer
Advertisement
Table of Contents
