6.3.3 Map Descriptor example 1 - Emulating a MXL/XLS device with events
The following list of Map Descriptors emulates a MXL Server,
SD – Server Descriptor
// Server Side Map Descriptors
Map Descriptors
Map_Descriptor_Name
, Data_Array_Name
SD_Fire1
, Fire
SD_Fire_Ack1
, Fire_Ack
SD_Trouble1
, Trouble
SD_Trouble2
, Trouble
SD_Trouble_Ack1
, Trouble_Ack
SD_Super1
, Super
SD_Super_Ack1
, Super_Ack
SD_Secur1
, Secur
SD_Secur_Ack1
, Secur_Ack
SD_Status1
, Status
SD_Audible1
, Audible
SD_Reset1
, Reset
Note that Trouble modules 1 and 2
on Panel 1 are emulated with two
separate Map Descriptors.
Notes:
1
MXL/XLS Server Map Descriptor fields differ in many respects from MXL/XLS Client Map Descriptors. Please follow the examples clearly and read all notes
to ensure a working configuration. No poller Map Descriptors may be defined in a configuration file that is used to configure a MXL/XLS Server.
2
Only one module specified by Block_Number can be emulated with a Server Map Descriptor whereas a Client Map Descriptor specifies a starting module
number with one module for every 256 counts of the Map Descriptor length. You have to use separate Map Descriptors for each module to emulate when
doing a Server configuration.
3
More than one Msg_Type Map Descriptor may be used to represent other modules.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com