Appendix A.7. Request % Compensation Used / % Dirty - FieldServer FS-8700-40 Driver Manual

FS-8700-40 SBT FSI Driver Manual

Appendix A.7. Request % Compensation Used / % Dirty

// Data_Arrays
Data_Array_Name , Data_Format
Comp_Used , Uint16
Dirty , Uint16
// Map_Descriptors
Map_Descriptor_Name , Scan_Interval , Data_Array_Name , Data_Array_Offset , Function , Node_Name , Block_Number , Length , Msg_Type
PNL_1_Comp_Used , 300s
PNL_1_Dirty , 300s
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
, Data_Array_Length
, 253
, 253
, Comp_Used , 0
, Dirty , 0
Block_Number sets
module number for which this
analog device data pertains
(must be DLC or ALD)
Page 29 of 34
, Rdbc , Panel1 , 1
, Rdbc , Panel1 , 2
the
Data values will be stored for
device addresses from 0 to
Length which can be from 1
to 253
, 253 , Compensation_Used
, 253 , Dirty
The data values stored are %
values per device address,
e.g. 1, 10 etc