Table of Contents
Advertisement
FS-8700-40 SBT FSI Driver Manual
6.2
Server Side Node Descriptors
Section Title
Nodes
Column Title
Function
Node_Name
Provide name for node
Node_ID
Panel number
Protocol
Specify protocol used
Specifies time FieldServer will reserve Server side connection
Server_Hold_Timeout
while waiting for the Client side to update data in Data_Array (if
necessary)
Example
// Server Side Nodes
Nodes
Node_Name
, Node_ID
Panel1
, 1
6.3
Server Side Map Descriptors
6.3.1 FieldServer Specific Map Descriptor Parameters
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Offset
Function
Server_Hold_Timeout*
11
Note that no port information is necessary on Server side.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
11
, Protocol
,
, SBT-FSI
Function
Name of this Map Descriptor
Name of Data Array where point data is to be fetched
from
Starting location in Data Array
Function of Server Map Descriptor
Specifies time FieldServer will reserve Server side
connection while waiting for the Client side to update
data in Data_Array (if necessary)
Page 19 of 34
Legal Values
Up
to
alphanumeric
characters
1-99
Cerberus, SBT-FSI
>1.0s
Legal Values
Up
to
32
alphanumeric
characters
One of the Data Array names
from "Data Array" section
above
0 to maximum specified in
"Data Array" section above
Server
>1.0s
32
Advertisement
Table of Contents
