Map Descriptor Example - FieldServer FS-8700-72 Driver Manual

FS-8700-72 Secutron Manual

5.3.4 Map Descriptor Example.

Map_Descriptor_Name , Scan_Interval , Data_Array_Name , Data_Array_Offset , Function
P1_POLLER , 0s
P1C1_DEVICES , -
P1C1_FUNCTION , -
P1C69_RESTART , -
P1C69_FUNCTION , -
P1C90_RESET , -
P1C90_FUNCTION , -
.
Any unique A Data Array name
name. Name must be one found
will appear in under Data_Arrays.
Bridge Map Data from a circuit
Descriptor event will be stored in
status the array at
information Data_Array_Offset.
screens. The Poller Data Array
will contain non-zero
data when
The rate at which the
communications with
driver polls the panel.
the panel is OK
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
, Poller , 0
, P1C1_DEVICES , 0
, P1C1_FUNCTION , 0
, P1C69_RESTART , 0
, P1C69_FUNCTION , 0
, P1C90_RESET , 0
, P1C90_FUNCTION , 0
Function must be
read for pollers and
all others
Passive_Client.
Page 9 of 16
, Node_Name , Secutron_Type , Secutron_Circuit , Length
, Rdbc , Node_1 , Poller
, Passive_Client , Node_1 , Device
, Passive_Client , Node_1 , Function
, Passive_Client , Node_1 , Device
, Passive_Client , Node_1 , Function
, Passive_Client , Node_1 , Device
, Passive_Client , Node_1 , Function
The type of data the
A name given
Map Descriptor
to the device to points to. Device
which the
data contains alarm
FieldServer is
statuses. Function
connected. data contains
condition codes.
Refer to Appendix
B.1 for more
information.
, - , 1
, 1 , 200
, 1 , 200
, 69 , 100
, 69 , 100
, 90 , 100
, 90 , 100
The circuit or
zone number
used to trap
incoming events
into the Map
Descriptor. See
Driver notes.
The number of devices
on the circuit this Map
Descriptor can detect
for incoming events.