Tray Settings - Ricoh SP 1200SF User Manual

Tray Settings

To access the Tray Settings tab, click the Start button and Printers and Faxes. Right-click your printer icon
and click Properties.
Paper Source Setting (1)
This feature identifies the paper size defined for each paper tray.
• Paper Size
This setting allows you to define which paper size is used for the tray and manual feed slot. Highlight the paper
source you want to define and then choose the paper size from the pull-down menu. Click Update to apply the
setting to the paper source.
• Default Source
To save your settings, click
source (tray or manual feed slot) that has a defined paper size that matches your document. If paper is in the
Manual feed slot, the machine will automatically pull from this slot no matter the size of paper.
Serial No. (2)
By clicking Auto Detect, the printer driver will probe the printer and display its serial number. If it fails to
receive the information, the screen will display "---------".
Note
The Auto Detect function is not available under the following printer conditions:
• The printer power switch is off.
• The printer is in an error state.
• The printer is in a network shared environment.
• The cable is not connected to the printer correctly.
2
OK Apply
or . The Auto Select setting will automatically pull paper from any paper
Printing
1
1
1
20