Commands Related To; Allocate; Allocate Guidelines - HP T6553 D45 Reference Manual

FUP Commands

Commands Related to ?

COMMAND
HISTORY
FC
!

ALLOCATE

Allocates file extents for a disk file. This command applies only to Enscribe files.
ALLOCATE fileset-list , num-extents [ , PARTONLY ]
fileset-list
is a list of disk files for which extents are to be allocated. You can specify
qualified-fileset for this fileset-list.
num-extents
is the total number of extents to be allocated to the file.
For nonpartitioned Disk Process 2 (DP2) files and key-sequenced partitioned files,
specify num-extents as a value from 1 through maximum-extents.
maximum-extents is the number of extents set with the MAXEXTENTS file
attribute when the file was created or last altered. The default value for
maximum-extents is 16. For more information, see
For partitioned files that are not key-sequenced, specify num-extents as a value
from 1 through 16 multiplied by the number of partitions. Each partition is allocated
16 extents (beginning with the start of the file) until the total num-extents are
allocated.
Note. Extents 0 through 15 are in partition zero, extents 16 through 31 are in partition one,
extents 32 through 47 are in partition two, and so on.
PARTONLY
allocates extents to any primary and secondary partitions of partitioned files in
fileset-list. If a primary partition name is referenced, the extents are
allocated only to the primary partition. If you omit PARTONLY, FUP allocates
extents to all the partitioned files in fileset-list. PARTONLY has no effect on
nonpartitioned files.

ALLOCATE Guidelines


num-extents has a different significance for different file types. For
key-sequenced partition files, it is the number of extents allocated in each partition.
Function
Displays previous FUP commands
Modifies a previous FUP command
Reexecutes a previous FUP command
File Utility Program (FUP) Reference Manual—523323-014
SET
2-6
Commands Related to ?
Page
2-81
2-73
2-4
on page 2-171.