Copy: Display Form - HP T6553 D45 Reference Manual

FUP Commands

COPY: Display Form

Displays the contents of a file (the Display Form of the COPY command) or makes a
record-by-record copy from one file to another (the Copy Form). The COPY command
functions apply to Enscribe files and SPOOLER files (code 129). This subsection
describes the Display Form.
Note. For information about making a record-by-record copy from one file to another with the
COPY command, see
To display files containing 8-bit characters, use the DISPLAYBITS option (from the
CONFIGURE command) with COPY.
Note. For more information about the DISPLAYBITS option and files with 8-bit characters, see
CONFIG[URE]
To display the contents of an Enscribe or SPOOLER file, use the Display Form of the
COPY command. This subsection describes only display-option syntax. For a
complete COPY syntax description, see
COPY [ in-filename ] [ , [ out-filename ]
[ , display-option ] ... ]
display-option is:
O[CTAL]
D[ECIMAL]
H[EX]
BYTE
A[SCII]
NO HEAD
[ NO ] TITLE
display-option
specifies the display format for the file. If you omit display-option, no
formatting or conversion occurs, and each record is displayed as it appears in
in-filename.
OCTAL or O
displays in octal and ASCII format.
DECIMAL or D
displays in decimal and ASCII format.
HEX or H
displays in hexadecimal and ASCII format.
COPY: Copy Form
on page 2-26.
File Utility Program (FUP) Reference Manual—523323-014
on page 2-36.
COPY: Copy Form
2-56
COPY: Display Form
on page 2-36.